The final tailing was rejected in the cobalt nickel circuit. The flotation pilot plant is shown. Results typical of a single shift during the pilot run are summarized. The recoveries of lead and copper were 87.1% and 81.6% in a concentrate analyzing 20.6% copper, 10.1% lead, 0.99% nickel, and 0.77% cobalt.
In this research, flotation of copper, lead and zinc minerals from a copper oxidesulfide ore was studied. The identification tests showed that the sample is a mixture of quartz, chalcopyrite, galena, cerussite, hemimorphite and iron oxide minerals with 5.04% CuO, 1.61% PbO, 2.07% ZnO and 56.40% SiO2. The experimental design methodology was conducted to investigate the effect of ...
Differential flotation of bulk sulfide concentrates from Duluth gabbro into copper and nickel concentrates could be implemented by first destroying the hydrophobic coating with ozone and then by recovering the copper concentrate with a copper selective collector. A number of parameters involved in the use of ozone, such as the sequence and the conditioning time of ozone treatment, the pulp pH ...
Zinc flotation adopted one roughing, three scavenging, four cleaning process. Roughing and scavenging adopted KYF flotation cell, and cleaning selected SF flotation cell BF flotation cell was used in copper lead separation process. The dewatering of copper, lead and zinc concentrates used Xinhai efficient deep cone thickener+ceramic filter.
Zinc flotation adopted a roughing, three scavenging, four cleaning process, roughing and scavenging adopted KYF flotation cell, and cleaning selected SF flotation cell BF flotation cell was used in copper lead separation process. The dewatering of copper, lead and zinc concentrates used Xinhai efficient deep cone thickener+ceramic filter.
Chat Now
Leave Massage
Copper Nickel Flotation Metallurgist amp; Mineral Processing ...
The final tailing was rejected in the cobalt nickel circuit. The flotation pilot plant is shown. Results typical of a single shift during the pilot run are summarized. The recoveries of lead and copper were 87.1% and 81.6% in a concentrate analyzing 20.6% copper, 10.1% lead, 0.99% nickel, and 0.77% cobalt.