Magnetic Separator is the most trusted machine used to recover metal from the waste materials. It is known for the easy separation process to detach fine particles which have poor magnetic properties. Magnetic separator provides the excellent separating effect, as it uses dynamic magnetic system design. Recycling industries are using magnetic ...
Dry Separation at Finer Sizes
When a minus 325 mesh fraction is tested, a separation sometimes occurs, but in most cases the feed passes through without separation. Response at higher frequencies was investigated with a smaller ¾ inch cross section U shaped magnet core 1 . Separation was performed with a nonmagnetic nonconducting plane surface 3 moved manually across the magnet pole as illustrated by the direction arrow 4. When separation occurred, the nonmagnetic mineral 5 would move with the plane, and the magn...
See full list on
Application of alternating and intermittent current to magnetic separation at a relatively high number of ampere turns was made possible by special electronic circuits. Actual power losses are low and include the I²R loss, which is the same that occurs in direct current magnetic separation, and the core loss, which has a magnitude corresponding to the I²R loss. Minerals may be dry separated close to the minus 325 mesh size at 60 hertz frequency and possibly at smaller particle sizes at higher frequency. In the wet separation of minus 325 mesh feeds, intermittent current provides for complete release of the magnetic fraction during the discharge cycle. For matted fibrous and magnetically coagulating feeds, a cross belt separator with an intermittent magnetizing current provides efficient separations.
materials and semi ﬁ nished products are called magnetic separation. Kanetec oﬀ ers a wide variety of magnetic separators for use with lump materials, bulk materials, clay like materials and liquids. A magnetic separator to select must be suitable for the purpose of use and have a sufficient capacity.
A magnetic separator is a device that uses a magnet to remove impurities and other magnetic materials from metal. Magnetic separators can be used before, during and after the production of a material and can be adjusted to attract different types of magnetic materials at different intensity levels. Although its use is almost always industrial ...
The dry magnetic separator generally does not need a tank for accommodating the slurry, and the material is conveyed by a vibrating feeding device, and a dustproof device is often provided. The wet magnetic separator has a tank to accommodate the slurry to maintain the fluidity of the material, and the pump is usually transported by a slurry pump.
96 Well Magnetic Plate. NVIGEN 96 Well Magnetic Plate is optimized for efficient magnetic separation of magnetic beads for high throughput assays. The plate uses high performance rare earth permanent magnets, which pull down beads to the bottom edge of each sample and allow quicker beads pellet formation.